Clearaudio Nano Phono V2

Its meticulously selected SMD components are assembled by hand in Erlangen and tested several times. The reward of these efforts is a signal to noise ratio of up to 84 decibels. The input impedance is set using plug-in links, so there is no loss of quality when using different moving magnet and moving coil cartridges.

The Nano Phono Headphone additionally contains a powerful headphone amplifier within the solid aluminium housing for private listening at the highest fidelity.


500 gram (Phonostage and power supply)


10 V eff. (1 kHz)

Nano Phono V2


Mode: MM and MC mode; switched by jumpers on the bottom of the unit

Input Impedance: Almost any cartridge can be used, through the use of input impedance jumpers: 50Ω, 100Ω, 400Ω, 1kΩ, 47kΩ

Amplification: Gain control from 34 to 67dB

Frequency response: 10Hz – 100kHz

Additional features: SMD technology – External power supply (prevents disturbances from the power line) – Gold plated RCA jacks – High end components – Fully Dual Mono circuit design – Subsonic filter optional

Dimensions (W/D/H in inches): 3.1 x 3.9 x 0.79

Dimensions (W/D/H in mm): 80 x 100 x 20

Manufacturers guarantee*: 3 Years




Additional Information

Weight 1 κιλά
Dimensions 80 × 100 × 20 cm